Publications
2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1977 1976 all years
Books
Payá-Vayá, G. (Ed.); Blume H. (Ed.) (2017):
Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems more
DOI: 10.13052/rp-9788793519138
ISBN: 9788793519138
Book Contributions
Badstübner, F.; Ködel, R.; Maurer, W.; Kunert, M.; Rolfsmeier, A.; Perez, J.; Giesemann, F.; Payá Vayá, G.; Blume, H.; Reade, G. (2017): The DESERVE Platform: A Flexible Development Framework to Seemlessly Support the ADAS Development Levels, Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems - The DESERVE Approach more
Giesemann, F.; Payá Vayá, G.; Blume, H.; Limmer, M.; Ritter, Werner R. (2017): Deep Learning for Advanced Driver Assistance Systems, Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems - The DESERVE Approach more
Mentzer, N.; von Egloffstein, N.; Krüger, L.; Payá Vayá, G.; Blume, H. (2017): Self-Calibration of Wide Baseline Stereo Camera Systems for Automotive Applications, Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems - The DESERVE Approach more
Journal Contributions
Maschhoff, P.; Heene, S.; Lavrentieva, S.; Hentrop, T.; Leibold, C.; Wahalla, M.-N.; Stanislawski, N.; Blume, H.; Scheper, T.; Blume, C. (2017):
An intelligent bioreactor system for the cultivation of a bioartificial vascular graft, Engineering in Life Sciences more
DOI: 10.1002/elsc.201600138
Nolting, S.; Payá-Vayá, G.; Giesemann, F.; Blume, H.; Niemann, S.; Müller-Schloer, C. (2017):
Dynamic Self-Reconfiguration of a MIPS-Based Soft-Core Processor Architecture, Journal of Parallel and Distributed Computing more
DOI: 10.1016/j.jpdc.2017.09.013
Payá-Vayá, G.; Bartels, C.; Blume, H. (2017):
Small footprint synthesizable temperature sensor for FPGA devices, Journal of Systems Architecture, Volume 76, p. 28–38 more
DOI: 10.1016/j.sysarc.2017.03.005
Probst, S.; Denicke, E.; Geck, B. (2017): In Situ Waveform Measurements within Doherty Power Amplifier under Operational Conditions, IEEE Transactions on Microwave Theory and Techniques Vol. 65, No. 6, pp. 2192 - 2200, June 2017
Weide-Zaage, K. (2017):
Simulation of Packaging under Harsh Environment Conditions
(Temperature, Pressure, Corrosion and Radiation)
, Microelectronics Reliability, Volume 76-77, September 2017
DOI: 10.1016/j.microrel.2017.07.026
Weide-Zaage, K.; Payá-Vayá, G. (2017):
COTS – Harsh Condition Effects Considerations from Technology to User Level, Adv. Sci. Technol. Eng. Syst. J. 2(3), 1592-1598 (2017)
ISBN: ISSN: 2415-6698
Conference Contributions
Arndt, O. J.; Spindeldreier, C.; Wohnrade, K.; Pfefferkorn, D.; Neuenhahn, M.; Blume, H. (2017):
FPGA Accelerated NoC-Simulation – A Case Study on the Intel Xeon Phi Ringbus Topology, Intl. Symp. Highly-Efficient Accelerators and Reconfigurable Technologies (HEART 2017), ACM
DOI: 10.1145/3120895.3120916
Arndt, O. J.; Träger, F. D.; Moß, T.; Blume, H. (2017):
Portable Implementation of Advanced Driver-Assistance Algorithms on Heterogeneous Architectures, Heterogeneity in Computing Workshop (HCW-17), hosted at Intl. Parallel and Distributed Processing Symp. Workshops (IPDPSW 2017), IEEE
DOI: 10.1109/IPDPSW.2017.100
Behmann, N.; Blume, H. (2017): Object Detection for Mobile and Automotive - Convolutional Neural Networks (CNNs) on Tensilica Vision DSPs, Cadence User Conference (CDNLive EMEA 2017), München, Germany
Cholewa, F.; Wielage M.; Pirsch, P.; Blume, H. (2017): Synthetic Aperture Radar with Fast Factorized Backprojection: A Scalable, Platform Independent Architecture for Exhaustive FPGA Resource Utilization, International Conference on Radar Systems 2017 (RADAR)
Denicke, E.; Hartmann, H.; Geck, B.; Manteuffel, D. (2017): MIMO Backscatter Channel and Data Transmission Measurements, 47th European Microwave Conference (EuMC), Nuremberg, Germany, October 08-13, 2017
Divanbeigi, S.; Aditya, E.; Olbrich, M. (2017):
Accelerated Mixed-Signal Simulations Using Multi-Core Architecture, Frontiers in Analog CAD more
ISBN: 978-3-8007-4442-8
Dürre, J.; Blume, H. (2017): SF3: A Scalabe and Flexible FPGA-Framework for Education and Rapid Prototyping, Proceedings of the International Conference on Microelectronic Systems Education (MSE 2017), Lake Louise, Canada
Dürre, J.; Blume, H. (2017): Teaching VHDL Design to Schoolchildren – A Scalable and Flexible FPGA Framework, Cadence User Conference (CDNLive EMEA 2017), München, Germany
Furtig, A.; Glaeser, G.; Grimm, C.; Hedrich, L.; Heinen, S.; Lee, H.-S. L.; Nitsche, G.; Olbrich, M.; Radojicic, C.; Speicher, F. (2017):
Novel Metrics for Analog Mixed-Signal Coverage, 20th IEEE International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS)
DOI: 10.1109/DDECS.2017.7934589
Gerlach, L.; Marquardt, D.; Payá Vayá, G.; Liu, S.; Weißbrich, M.; Doclo, S.; Blume, H.
(2017):
Analyzing the Trade-Off between Power Consumption and Beamforming Algorithm Performance using a Hearing Aid ASIP, Embedded Computer Systems: Architectures, Modeling, and Simulation (SAMOS), 2017 International Conference on, IEEE, Pythagorion, Greece more
DOI: 10.1109/SAMOS.2017.8344615
Giesemann, F.; Payá-Vayá, G.; Gerlach, L.; Blume, H.; Pflug, F.; von Voigt, G. (2017): Using a Genetic Algorithm Approach to Reduce Register File Pressure during Instruction Scheduling, International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation 2017 (SAMOS XVII)
Hartig, J.; Payá Vayá, G.; Heymann, H.; Blume, H. (2017):
Tool-Supported Design Space Exploration of a Processor System for SIFT-Feature Detection, IEEE International Conference on Consumer Electronics (ICCE), Berlin, 2017
DOI: 10.1109/ICCE-Berlin.2017.8210619
Hartig, J.; Payá Vayá, G.; Mentzer, N.; Blume, H. (2017):
Balanced Application-Specific Processor System for Efficient SIFT-Feature Detection, IEEE International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation (SAMOS XVII), Stamatis Vassiliadis Best Paper Award, 2017
DOI: 10.1109/SAMOS.2017.8344614
Leibold, C.; Stanislawski, N.; Blume, C.; Blume, H. (2017): A Mobile Electrochemical (Bio-)Sensor Node for a Vascular Graft Bioreactor, Biomedical Circuits and Systems Conference (BioCAS) 2017
Najafi, A.; Weißbrich, M.; Payá Vayá, G.; García-Ortiz, A. (2017): A Fair Comparison of Adders in Stochastic Regime, 2017 27th International Symposium on Power and Timing Modeling, Optimization and Simulation (PATMOS)
Nolting, S.; Giesemann, F.; Hartig, J.; Schmider, A.; Payá-Vayá, G (2017): Application-Specific Soft-Core Vector Processor for Advanced Driver Assistance Systems, 27th International Conference on Field-Programmable Logic and Applications 2017, Ghent, Belgium
Nolting, S.; Liu, L.; Payá-Vayá, G. (2017): Two-LUT-Based Synthesizable Temperature Sensor for Virtex-6 FPGA Devices, 27th International Conference on Field-Programmable Logic and Applications 2017, Ghent, Belgium
Pohl, M.; Erstling, M.; Hein, V.; Weide-Zaage, K.; Chen, T. (2017):
Differences in Reliability Effects for Thick Copper and Thick Aluminum Metallizations
, IEEE International Reliability Physics Symposium (IRPS), Pages: MR-2.1 - MR-2.7
DOI: 10.1109/IRPS.2017.7936377
Seifert, C.; Thiemann, J.; Gerlach, L.; Volkmar, T.; Payá-Vayá, G.; Blume, H.; van de Par, S. (2017):
Real-Time Implementation of a GMM-Based Binaural Localization Algorithm on a VLIW-SIMD Processor, International Conference on Multimedia and Expo (ICME) 2017, IEEE
DOI: 10.1109/ICME.2017.8019478
Sekar Sethu, R.; Hein, V.; Erstling, M.; Weide-Zaage, K. (2017):
Simulation investigations for the comparison of standard and highly robust AlCu thick metal tracks, International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Pages: 1 - 6
DOI: 10.1109/EuroSimE.2017.7926226
Stuckenberg, T.; Blume, H. (2017):
A Hardware Efficient Preamble Detection Algorithm for Powerline Communication, Journal of Communications, JCM
DOI: 10.12720/jcm
Webering, F.; Payá-Vayá, G.; Aditya, E.; Dürre, J.; Blume, H. (2017): An Integrated Heated Testbench for Characterizing High Temperature ICs [Best Flash Presentation Award], ICT.OPEN2017, Amersfoort, Netherlands
Weide-Zaage, K.; Eichin, P.; Chen, C.; Zhao, Y.; Zhao, L. (2017): COTS - Radiation Effects Approaches and Considerations, Surface Mount Technology Association (SMTA), Pan Pacific Symposium (Best Paper)
Weide-Zaage, K.; Frémont, H.; Guédon- Gracia, A.; Feng, Y.; Chen, A. (2017): Study of Corrosion in BGA solder balls, EUROCORR 2017, 20th International Corrosion Congress (ICC) and Process Safety Congress 2017
Weide-Zaage, K.; Fremont, H.; Hein, V. (2017): Packages and Interconnects under Harsh Conditions, Surface Mount Technology Association (SMTA), International Conference
Weißbrich, M.; Payá-Vayá, G.; Gerlach, L.; Blume, H.; Najafi, A.; García-Ortiz, A. (2017): FLINT+: A Runtime-Configurable Emulation-Based Stochastic Timing Analysis Framework, 2017 27th International Symposium on Power and Timing Modeling, Optimization and Simulation (PATMOS)
Wielage, M.; Cholewa, F.; Fahnemann, C.; Pirsch, P.; Blume, H. (2017): High Performance and Low Power Architectures: GPU vs. FPGA for Fast Factorized Backprojection, Proceedings of CANDAR Symposium (2017)
Wielage, M.; Cholewa, F.; Riggers, C.; Pirsch, P.; Blume, H. (2017): Parallelization Strategies for Fast Factorized Backprojection SAR on Embedded Multi-Core Architectures, 2017 IEEE International Conference on Microwave, Communications, Antennas and Electronic Systems
PhD Theses
Leibold, C. (2017):
Drahtlos gekoppelte Sensoreinheiten für das Monitoring von organischen Kultivierungsprozessen in Tissue Engineering Bioreaktoren, Verlag Dr. Hut more
ISBN: 978-3-8439-3233-2
Others
Behmann, N.; Blume, H. (2017): High-Performance, Energy-efficient Computer Vision for ADAS on Tensilica Vision P6, Tensilica Day 2017, Hannover, Germany
Gerlach, L.; Payá-Vayá, G.; Blume, H. (2017): Low-Power Optimization of a VLIW-SIMD ASIP for Hearing Aid Devices, Tensilica Day—Trends in Modern Design of Configurable Processors 2017, Hannover, Germany
Payá-Vayá, G.; Roskamp, S.; Webering, F.; Blume, H. (2017): Improving the Processing Performance of a DSP for High Temperature Electronics using Circuit-Level Timing Speculation, Tensilica Day—Trends in Modern Design of Configurable Processors
Weide-Zaage, K. (2017): Considerations Concerning Simulation of Radiation Effects in Chip and Packages, International Workshop on Reliability and Radiation Effects of Micro- and Nano-Electronic Devices 2017 (IWRRE-MNED2017) Invited Speaker