Logo Leibniz Universität Hannover
Logo: Institut für Mikroelektronische Systeme
Logo Leibniz Universität Hannover
Logo: Institut für Mikroelektronische Systeme
  • Zielgruppen
  • Suche
 

Publikationen

Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1977 1976 alle Jahre

Buchbeiträge

El-Hadidy, M.; El-Absi, M.; Sit, L.; Kock, M.; Zwick, T.; Blume, H.; Kaiser, T. (2013): Interference Alignment for UWB-MIMO Communication Systems, Ultra-Wideband Radio Technologies for Communications, Localization and Sensor Applications
DOI: 10.5772/55083
ISBN: 978-953-51-0936-5

Journalbeiträge

Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V. (2013): Dynamic simulation of octahedron slotted metal structures, Microelectronics Reliability, Volume 53, Issues 9–11, Pages 1606–1610
DOI: 10.1016/j.microrel.2013.07.059

Meinshausen, L.; Fremont, H.; Weide-Zaage, K.; Plano, B.  (2013): Electro- and Thermomigration-induced IMC Formation in SnAg3.0Cu0.5 Solder Joints on Nickel Gold Pads, Microelectronics Reliability, Volume 53, Issues 9–11, Pages 1575–1580
DOI: 10.1016/j.microrel.2013.07.038

Moujbani, A.; Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V.; Meinshausen, L. (2013): Dynamic Simulation of Migration Induced Failure Mechanism in Integrated Circuit Interconnects, Microelectronics Reliability, Volume 53, Issues 9–11, Pages 1365–1369
DOI: 10.1016/j.microrel.2013.07.097

Orlob, C.; Reinecke, T.; Denicke, E.; Geck, B.; Rolfes, I. (2013): Compact Unfocused Antenna Setup for X-Band Free-Space Dielectric Measurements based on Line-Network-Network Calibration Method, IEEE Transactions on Instrumentation and Measurement . Vol. 62, No. 7, pp. 1982-1989, July 2013

Konferenzbeiträge

Weide-Zaage, K.; Kludt, J.; Meinshausen, L.; Farajzadeh, A. (2013): Synergiepotenzial von finite Elemente Simulationen bei der Optimierung des Entwurfsprozesses von Metallisierungen, VDE ITG, 24. GMM Workshop, Testmethoden und Zuverlässigkeit von Schaltungen und Systemen

Arndt, O. J.; Becker, D.; Banz, C.; Blume, H. (2013): Parallel Implementation of Real-Time Semi-Global Matching on Embedded Multi-Core Architectures, International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation (SAMOS XIII), IEEE (56 - 63)
DOI: 10.1109/SAMOS.2013.6621106

Brückner, H.-P.; Blume, H. (2013): Comparison of Hardware Platforms for Low-Power, Real-Time Interactive Movement Sonification, Multisensory Motor Behavior: Impact of Sound, International Conference weitere Informationen

Brückner, H.-P.; Blume, H. (2013): Analysis of Multiple Hardware Platforms for Power-Efficient, Low-Latency Interactive Movement Sonification in Stroke-Rehabilitation, Proceedings of 1st Russian-German Conference on Biomedical Engineering, Hannover, B. Chichkoc, E. Fadeeva, L.A. Kahr, T. Ortmaier, PZH Verlag (83)
ISBN: 978-3-944586-25-0

Brückner, H.-P.; Nowosielski, R.; Kluge, H.; Blume, H. (2013): Mobile and Wireless Inertial Sensor Platform for Motion Capturing in Stroke Rehabilitation Sessions, Advances in Sensors and Interfaces (IWASI), 2013 5th IEEE International Workshop on, (14-19)
DOI: 10.1109/IWASI.2013.6576085
ISBN: 978-1-4799-0039-8

Brückner, H.-P.; Spindeldreier, C.; Blume, H. (2013): Modification and fixed-point analysis of a Kalman filter for orientation estimation based on 9D inertial measurement unit data, Engineering in Medicine and Biology Society (EMBC), 2013 35th Annual International Conference of the IEEE, (3953-3956)
DOI: 10.1109/EMBC.2013.6610410
ISBN: 1557-170X

Brückner, H.-P.; Spindeldreier, C.; Blume, H. (2013): Energy-Efficient Inertial Sensor Fusion on Heterogeneous FPGA-Fabric / RISC System on Chip, Sensing Technology (ICST), 2013 Seventh International Conference on, (506-511)
DOI: 10.1109/ICSensT.2013.6727704
ISBN: 978-1-4673-5220-8

Dellavale, D.; Leibold, C.; Payá-Vayá, G.; Blume, H.; Alam, M.; Schwabe, K.; Krauss, J. (2013): Optimization of a Phase–to–Amplitude Coupling Algorithm for Real–Time Processing of Brain Electrical Signals, Conference ICT.OPEN 2013, Proceedigns of ICT.OPEN 2013, (68--73) weitere Informationen
ISBN: 978-90-73461-84-0

Denicke, E.; Härke, D.; Geck, B. (2013): Investigating Multi-Antenna RFID Systems by Means of Time-Varying Scattering Parameters, 7th European Conference on Antennas and Propagation (EuCAP 2013), Gothenburg, Sweden, April 08-12, 2013

Hesselbarth; Blume, S.; Holger (2013): Methoden zur applikationsspezifischen Verlustleitungsoptimierung für eingebettete Prozessoren, 15. ITG-Fachtagung für Elektronische Medien (Fernsehsehminar), Informationstechnische Gesellschaft im VDE weitere Informationen

Hölldampf, S.; Lee, H.-S. L.; Olbrich, M.; Barke, E. (2013): Generation of Piecewise-Linear Semiconductor Models for Accelerated Mixed-Signal Simulation, Frontiers in Analog CAD 2013 (FAC 2013) weitere Informationen

Kärgel, M.; Olbrich, M.; Barke, E. (2013): Verification of Mixed-Signal Systems with Range Based Signal Representations, Frontiers in Analog CAD 2013 (FAC 2013)

Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V. (2013): Overlap Design for Higher Tungsten Via Robustness in AlCu Metallizations, IEEE, Integrated Reliability Workshop Final Report (IIRW) pp. 137-141
DOI: 10.1109/IIRW.2013.6804178
ISBN: 978-1-4799-0350-4

Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V. (2013): Deformation of Slotted Metal Tracks, IEEE, Integrated Reliability Workshop Final Report (IIRW), pp. 161-165
DOI: 10.1109/IIRW.2013.6804184
ISBN: 978-1-4799-0350-4

Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V. (2013): Characterization of a new designed octahedron slotted metal track by simulations, IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)
DOI: 10.1109/EuroSimE.2013.6529907
ISBN: 978-1-4673-6138-5

Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V. (2013): Investigation of Thermomigration in Aluminum Metallization, IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)
DOI: 10.1109/EuroSimE.2013.6529896
ISBN: 978-1-4673-6138-5

Kludt, J.; Weide-Zaage, K.; Ackermann, M.; Hein, V.; Moujbani, A. (2013): Optimierung von Metallisierungsstrukturen mit Hilfe von thermisch-elektrisch-mechanischen FE-Simulationen, VDE ITG/GI/GMM-Fachtagung
ISBN: 978-3-8007-3539-6

Kock, M.; Blume, H. (2013): Effiziente Hardwarearchitekturen für Interference Alignment in drahtlosen Kommunikationssystemen, 15. ITG-Fachtagung für Elektronische Medien (Fernsehsehminar)

Kollmitzer, M.; Olbrich, M.; Barke, E. (2013): Analysis and Modeling of Minority Carrier Injection in Deep-Trench Based BCD Technologies, 9th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME 2013), (245-248)
DOI: 10.1109/PRIME.2013.6603160

Meinshausen, L.; Weide-Zaage, K.; Fremont, H. (2013): Influence of contact geometry variations on the life time distribution of IC packages during electromigration testing, IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)
DOI: 10.1109/EuroSimE.2013.6529895
ISBN: 978-1-4673-6138-5

Nowosielski, R.; Gerlach, L.; Payá-Vayá, G.; Hesselbarth, S.; Blume, H. (2013): Methodology for Observation and Evaluation of Fault Tolerance Implementations inside High Temperature ASICs, Conference ICT.OPEN 2013, Proceedings of ICT.OPEN 2013, (97--101), Eindhoven, Netherlands weitere Informationen
ISBN: 978-90-73461-84-0

Payá-Vayá, G. (2013): ASIP-Architekturen für digitale Hörgerätesysteme – Ergebnisse aus dem Exzellenzcluster Hearing4all, DESIGN&ELEKTRONIK-Entwicklerforum "Electronics goes medical", Tagunsunterlagen DESIGN&ELEKTRONIK-Entwicklerforum "Electronics goes medical"
DOI: www.electronics-goes-medical.de
ISBN: 978-3-645-50123-1

Payá-Vayá, G.; Seifert, C.; Blume, H. (2013): Design of Application-Specific Instruction-Set Processors for Digital Hearing Aid Systems, 1st Russian German Conference on Biomedical Engineering (RGC 2013), Proceedings of 1st Russian German Conference on Biomedical Engineering (RGC 2013), B. Chichkov, E. Fadeeva, L.A. Kahrs, T. Ortmaier, PZH Verlag (32)
ISBN: 978-3-944586-25-0

Pfitzner, M.; Cholewa, F.; Pirsch, P.; Blume, H. (2013): FPGA-based Architecture for real-time SAR processing with integrated Motion Compensation, The 4th Asia-Pacific Conference on Synthetic Aperture Radar (APSAR)

Pfitzner, M.; Cholewa, F.; Pirsch, P.; Blume, H. (2013): Development and Potential of Real-Time FPGA Frequency-Based SAR Image Processing for Short-Range FMCW Applications, The 2013 International Conference on Radar (RADAR2013)

Scharf, O.; Olbrich, M.; Barke, E.  (2013): Lösungsverfahren für nichtlineare implizite Gleichungssysteme unter Verwendung von Affiner Arithmetik und Gebietsaufteilungen , ANALOG 2-1, VDE-Verlag
ISBN: 978-3-8007-3467-2

Schewior, G.; Blume, H. (2013): Enhanced Motion Estimation for Driver Assistance Systems - Integration of a Curved Road Model, Consumer Electronics (GCCE), 2013 IEEE 2nd Global Conference on, (483-487)
DOI: 10.1109/GCCE.2013.6664897
ISBN: 978-1-4799-0890-5

Schlobohm, J.; Weide-Zaage, K.; Rongen, R.T.H.; Voogt, F.C.; Roucou, R. (2013): Simulation of CSP-Solder Bumps with a Plastic Core, IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)
DOI: 10.1109/EuroSimE.2013.6529979

Schmädecke, I.; Blume, H. (2013): Hardware-Accelerator Design for Energy-Efficient Acoustic Feature Extraction (accepted for publication), 2013 IEEE 2nd Global Conference on Consumer Electronics (GCCE)

Schmädecke, I.; Blume, H. (2013): High Performance Hardware Architectures for Automated Music Classification, Algorithms from and for Nature and Life, Springer (539-547)
DOI: 10.1007/978-3-319-00035-0_55
ISBN: 978-3-319-00034-3

Schmädecke, I.; Leibold, C.; Brückner, H.-P.; Blume, H. (2013): Project-organized Education: From FPGA Prototyping to ASIC Design, Microelectronic Systems Education (MSE), 2013 IEEE International Conference on, (9-12)
DOI: 10.1109/MSE.2013.6566691
ISBN: 978-1-4799-0139-5

Seifert, C.; Payá-Vayá, G.; Blume, H. (2013): A Multi-Channel Audio Extension Board for Binaural Hearing Aid Systems, Conference ICT.OPEN 2013, Proceedings of ICT.OPEN 2013, (33--37) weitere Informationen
ISBN: 978-90-73461-84-0

Weide-Zaage, K.; Schlobohm, J.; Frémont, H.; Farajzadeh, A.; Kludt, J. (2013): 3D Integration a Thermal-Electrical-Mechanical-Reliability Study, Surface Mount Technology Association (SMTA), Pan Pacific Symposium

Werner, N.; Payá-Vayá, G.; Blume, H. (2013): Case Study: Using the Xtensa LX4 Configurable Processor for Hearing Aid Applications, Conference ICT.OPEN 2013, Proceedings of ICT.OPEN 2013, (27-32) weitere Informationen
ISBN: 978-90-73461-84-0

Dissertationen

Banz, C. (2013): Design and Analysis of Architectures for Stereo Vision, Shaker Verlag (196)
DOI: 10.2370/9783844024012
ISBN: 978-3-8440-2401-2

Sonstiges

Arndt, O. J.; Becker, D.; Blume, H. (2013): Parallele Implementierung eines Semi-Global Matching auf eingebetteten Multi-Core Architekturen unter Echtzeitbedingungen, Eingeladener Vortrag bei Konferenz "Parallel 2013", Karlsruhe

Payá-Vayá, G.; Seifert, C.; Blume, H. (2013): Application-Specific Instruction-Set Processors for Ultra-Low-Power Hearing Aid Devices, 26th International System-on-Chip Conference (SOCC 2013) (invited poster and demo presentation)